|
|
|
|
|
Replica Tag Heuer Watches's latest timepiece is the first watch to combine tourbillon and leaping hour complications. The intricately skeletonized timepiece provides a clear view of its HW4401 manually wound mechanical caliber, which has an extended power reserve indicated on the back side of the case. The dial is black sapphire to allow the steel bridges to be seen clearly. The new Tourbillon Jumping Hour, which is a part of Replica Tag Heuer Watches's Ocean collection, will be offered in red or white gold cases. Both versions come with diamonds weighing a total of 6.25 carats.
It is not only the first Replica Tag Heuer Watches timepiece to combine a jumping-hour feature with a Tourbillon, but it's also more complex due to its unusual design. The tourbillon cage, instead of being mounted on the mainplate of the movement, is suspended by two hand-chamfered bridges.Replica Tag Heuer Watches The tourbillon appears to be floating in the air, and not connected to the movement. The wheel that is attached to the outer edge of the tourbillon and is almost entirely covered by the lower part of the minute track is the barely noticeable connection. The tourbillon, which is located between two sapphire sheets, rotates for 60 seconds. This is used to indicate the seconds.
The upper part of the dial has a jumping hour and minute track. Replica Tag Heuer Watches designers placed the hour aperture at the top of the dial. It shows the current hours, which are updated every 60 minutes. For the minutes, they used a red hand that rotated around the minute track. The minute hand is never in the way of the jumping hour indication thanks to this clever solution. The minute track, which is also held in place by a series open-worked and hand-decorated bridges, is similar to the cage of the tourbillon (which only weighs 0.49 grams). The representatives of the brand revealed that the entire dial design is inspired by Modernist Architecture,Tag Heuer Replica Watches which uses steel and glass mediums. The watch's architecture is stunning and looks dynamic and slick from the front as well as the back. It also has a retrograde power indicator that shows the amount of power left in the impressive 110-hour storage. The inclusion of dual barrels in the series is what allows for this extended power reserve.
The 41-jewelled HW4401 calibre is made up of 330 parts. The diameter of the caliber is 36 mm and its height 8.62 mm. The movement operates at a frequency of 4Hz, and features a flat balancespring and a variable-inertia balanced. The movement features a Cotes de Geneve motif with black DLC treatment and micro-blasting. It also has circular grained gear train.
The case is brushed satin finish on the band and housing, and polished for the bezel. The watch has a 50-meter water resistance. It is attached to a matte black alligator strap with ardillon buckle.
Replica Tag Heuer Watches Ocean Tourbillon Jumping Hours comes in four different versions. Each version is limited to a certain number of copies. The cases come in two materials: 18K rose gold and 18K gold. If you don't find these versions, which will cost at least several hundred dollars, luxurious enough, there are ten additional models available in each material. These cases are adorned with 58 baguette-cut stones weighing a total of 6.25 carsats.